The first link is so slow that everytime that I start to download it crachs and the mirror does not have. Blaupunkt FX 2012 V4 for RNS310 VW-Seat-Skoda.
• I decided to create this tutorial as a definitive guide to updating the Bluetooth/USB firmware, due to a lack of other information available online! If you've recently bought a 2008-2012 Ford with bluetooth audio and USB, or perhaps if you've retro-fitted the Bluetooth/USB/voice control components, you might need to update the firmware in order to ensure proper compatibility with iPhones and modern devices. Also, these updates improve iPod reliability and compatibility and allow the audio to be transmitted over USB in order for the audio system's DAC to decode it instead of having to have the 'aux' lead attached at the same time. The illustrative photo in this guide shows me performing the update to my 2010 Mondeo's Ford/Blaupunkt NX touch-screen nav system, but it works with any USB-capable audio system (for example the Sony 6 CD/DAB unit) in any the vehicles listed below. Dream theater metropolis part 2 scenes from a memory rar.
This tutorial applies to anyone who owns one of the following vehicles and build dates, with the bluetooth and USB audio interface. If you are unsure of your vehicle's build date, check by looking it up. C-Max - February 2008 to January 2012 Fiesta - July 2008 to December 2011 Focus - February 2008 to January 2012 Galaxy - September 2008 to January 2012 Kuga - February 2008 to January 2012 Mondeo - September 2008 to January 2012 Ranger - From April 2009 Transit - From June 2009 Preparation: 1.
Download the update from here: 2. Format a USB memory stick, ensuring the file system is set to FAT32 3. Unzip the contents (all 21 items) of the zip file you just downloaded, and copy them to the root of the memory stick, i.e. Without placing them in any folders. The contents of the memory stick should appear as below: Now, head to your car, unlock it, get in, and follow the steps below carefully: 1. Make sure your climate control is completely switched off to avoid the blower fan running which will cause the battery to drain faster. It's probably best to do this update after the vehicle has been driven for around 15 minutes or longer, to ensure the battery is freshly charged.
If you receive low battery warnings during this procedure, it may cause the audio system to shut down and the update to fail. In reality you should be absolutely fine, and my battery is probably just past its best (yes, I received a 'low battery' message when I did the first update), but it's worth being cautious! Switch on the radio WITHOUT turning on the ignition 3. Insert the memory stick into the USB socket 4. If nothing appears on the screen, switch to the AUX/USB input. You will then receive a message stating that there are no media files on the device.
Now switch the ignition on but do not turn the engine on. If you don't have keyless start, turn the key two clicks to turn the ignition on. If you do have keyless start, press the button WITHOUT depressing the clutch (manual) or brake (automatic).
Now the radio should initialise and perform the update. It will display 'Update running' (or words to that effect). DO NOT switch off the ignition, or switch on the engine during this time. The update will take up to 20 minutes to apply, and it feels a lot longer if you're sitting watching it! Now would be a good time to make a cup of tea. Once the update is finished, you will receive a confirmation message on the display briefly, and then it will switch back to radio playback. Power off the radio, then power it back up again and check the USB and Bluetooth functionality.